MIT Academy of Engineering
Incubator

MIT Academy of Engineering

Pune, Maharashtra, India

MIT Academy of Engineering का Section 8 इन्क्यूबेटर, Alandi, पुणे में, जो छात्रों और बाहरी सदस्यों के लिए प्री-इन्क्यूबेशन, इन्क्यूबेशन और एक्सेलेरेशन चलाता है।

2Programs

MIT Academy of Engineering at a glance

AddressMIT Academy of Engineering, Alandi Road, Pune - 412 105, Maharashtra (India)
Programmes4 standing programmes
Official websitemitaoe.ac.in
Emailecell@mitaoe.ac.in

Programs by MIT Academy of Engineering

2 past programs · Filter all programs

Past programs

आगे क्या?

यह काफ़ी पहले बंद हुआ था और हमें नहीं पता कि यह फिर चलेगा या नहीं। "मुझे बताएँ" दबाएँ, चलने पर हम ईमेल करेंगे।

आगे क्या?

यह काफ़ी पहले बंद हुआ था और हमें नहीं पता कि यह फिर चलेगा या नहीं। "मुझे बताएँ" दबाएँ, चलने पर हम ईमेल करेंगे।

Which MIT Academy of Engineering programme fits you

4 programmes compared by who they are for, the stage they accept, how long they run and what they cost.

ProgrammeBest forStageDurationFormatCost
MITAoE EDF Pre-incubation PlatformStudents with an idea, business plan, prototype or project that could become a startup—6 to 12 months——
MITAoE EDF Incubation PlatformMITAoE students and external members who have completed pre-incubation—12 to 18 months——
MITAoE EDF Acceleration PlatformStudents whose startup has graduated from incubation—6 to 12 months——
E-Summit Bizz Model competitionAnyone with an idea————

Programmes they run

Standing programmes at MIT Academy of Engineering, separate from the funding calls above.

Pre-incubation for students with an idea, business plan, prototype or project that could become a startup.

Best for: Students with an idea, business plan, prototype or project that could become a startup

  • 6 to 12 months
What you get, who can apply and how to apply

Pre-incubation is the first stage at MITAoE EDF, the institute's section 8 incubator. It is for students who want to turn an idea, business plan, prototype or project into a startup. It runs for six to 12 months.

What you get

  • Access to the centre's mentors and the co-working space, once approved
  • Support to test and develop the idea before company formation

Who can apply

  • Students who are members of E-Cell, the student entrepreneurship club

How selection works: you submit the form, the Review Committee interviews you and recommends it, and the CEO approves entry. Review meetings are described as scheduled at the start of each semester.

How to apply: send the filled application form to the CEO or the Incubation Manager of MITAoE EDF, through your School Dean. Confirm the current intake first.

Full MITAoE EDF Pre-incubation Platform guide

Incubation for MITAoE students and external members who have completed pre-incubation.

Best for: MITAoE students and external members who have completed pre-incubation

  • 12 to 18 months
What you get, who can apply and how to apply

Incubation follows pre-incubation at MITAoE EDF. The centre provides incubation to MITAoE students and external members. It runs for 12 to 18 months in the co-working space, with mentors and the support services the centre lists.

What you get

  • A dedicated co-working space with mentors on board
  • Help with regulatory compliance, accounting and financial management, and intellectual property rights
  • Introductions to angel investors, venture capital, bank loans and loan guarantee programmes

Who can apply

  • MITAoE students and external members who have completed pre-incubation

How selection works: entry needs the approval of the CEO of MITAoE EDF.

Equity: the policy says the centre may negotiate a fixed equity stake of up to 2% in an incubated company, or a share of revenue. Terms are agreed case by case.

How to apply: apply or register after completing pre-incubation, with the approval of the CEO of MITAoE EDF.

Full MITAoE EDF Incubation Platform guide

Acceleration for startups that have graduated from the incubation phase.

Best for: Students whose startup has graduated from incubation

  • 6 to 12 months
What you get, who can apply and how to apply

Acceleration is the last stage at MITAoE EDF. It is open to students whose startup has graduated from the incubation phase. It runs for six to 12 months.

Who can apply

  • Students whose startup has graduated from incubation

How selection works: entry needs the approval of the CEO of MITAoE EDF.

How to apply: apply or register after graduating from incubation, with the approval of the CEO of MITAoE EDF.

Official programme page

A business-model pitch competition run by E-Cell at E-Summit 2022. Open to anyone with an idea.

Best for: Anyone with an idea

What you get, who can apply and how to apply

This pitch competition ran at E-Summit 2022. Anyone with an idea could pitch a business model, and a prototype could be used to demonstrate it. It is a past event, so check the centre for any new round.

Who can apply

  • Anyone with an idea
Official programme page

Labs & facilities

Equipment and space on campus.

Dedicated Co-working Space

Incubatees get a dedicated co-working space with mentors on board.

Support services

Help offered alongside funding and space.

IP & patents

Help with intellectual property rights.

Regulatory support

Help with regulatory compliance.

Business advisory

Business training programmes and an advisory board of mentors.

Legal & finance

Help with accounting and financial management.

Technology transfer

Help with commercialising technology.

Recognitions & empanelments

Official approvals this incubator holds.

MSME Host Institute· 2020

The centre says the institute was approved as a Host Institute for an MSME business incubator scheme. The approval period is not stated on its pages.

How to apply to MIT Academy of Engineering

सही कार्यक्रम चुनें

  • जिन छात्रों के पास शुरुआती विचार या परियोजना है, वे प्री-इन्क्यूबेशन से शुरू करें।
  • इन्क्यूबेशन और एक्सेलेरेशन केवल पिछला चरण पूरा होने के बाद खुलते हैं।
  • जो संस्थापक MITAoE के छात्र नहीं हैं, वे इन्क्यूबेशन के बारे में पूछ सकते हैं, क्योंकि नीति में बाहरी सदस्यों का उल्लेख है।

आवेदन कैसे काम करते हैं

  • प्री-इन्क्यूबेशन के लिए पहले E-Cell की सदस्यता चाहिए।
  • भरा हुआ आवेदन फ़ॉर्म MITAoE EDF के CEO या Incubation Manager को भेजें।
  • फ़ॉर्म संबंधित School Dean के माध्यम से आगे भेजा जाता है।
  • फ़ॉर्म मिलने के बाद एक Review Committee आपका इंटरव्यू लेती है।
  • समीक्षा बैठकें हर सेमेस्टर की शुरुआत में निर्धारित बताई गई हैं।

चयन कैसे होता है

  • Review Committee फ़ॉर्म का मूल्यांकन करती है और CEO को सिफ़ारिश करती है।
  • हर चरण में प्रवेश CEO स्वीकृत करते हैं।
  • हर चरण की अवधि तय है: प्री-इन्क्यूबेशन 6 से 12 महीने, इन्क्यूबेशन 12 से 18 महीने, और एक्सेलेरेशन 6 से 12 महीने।

समीक्षक क्या देखते हैं

  • ऐसा बिज़नेस विचार जो शुद्ध शोध से स्पष्ट रूप से अलग हो।
  • विचार में प्रगति, जैसे बिज़नेस प्लान, प्रोटोटाइप या परियोजना।

प्रवेश की तिथियाँ केंद्र के पृष्ठों पर प्रकाशित नहीं हैं, और वे पृष्ठ 2020 से 2023 के बीच के हैं। आवेदन से पहले केंद्र से वर्तमान प्रवेश की पुष्टि करें।

About MIT Academy of Engineering

MIT Academy of Engineering (MITAoE) पुणे के Alandi Road पर स्थित एक स्वायत्त इंजीनियरिंग संस्थान है, जो Savitribai Phule Pune University से संबद्ध है। इसका स्टार्टअप सहयोग MITAoE Entrepreneurial Development Foundation (MITAoE EDF) के माध्यम से चलता है, जो संस्थान द्वारा स्थापित एक गैर-लाभकारी Section 8 कंपनी है और 7 फ़रवरी 2019 को निगमित हुई।

संस्थान का कहना है कि उसे AICTE और UGC से अनुमोदन प्राप्त है और उसके पास 23 नवंबर 2023 से 22 नवंबर 2028 के चक्र के लिए NAAC 'A' मान्यता है। ये संस्थान-स्तर के तथ्य हैं; यह पृष्ठ इन्क्यूबेटर वाले हिस्से को कवर करता है।

कार्यक्रम कैसे चलते हैं

केंद्र तीन चरण क्रम से चलाता है। प्री-इन्क्यूबेशन उन छात्रों के लिए है जिनके पास कोई विचार, बिज़नेस प्लान, प्रोटोटाइप या परियोजना है जो स्टार्टअप बन सकती है, और यह छह से 12 महीने चलता है। इसे पूरा करने वाले छात्र 12 से 18 महीने के इन्क्यूबेशन में जा सकते हैं। इन्क्यूबेशन पूरा करने वाले छात्र फिर छह से 12 महीने के एक्सेलेरेशन कार्यक्रम में शामिल हो सकते हैं। हर चरण के लिए केंद्र के CEO की स्वीकृति चाहिए।

नीति के अनुसार, प्री-इन्क्यूबेशन में स्वीकार होने से पहले किसी बिज़नेस विचार को शुद्ध शोध से स्पष्ट रूप से अलग होना चाहिए। प्री-इन्क्यूबेशन के लिए परिसर के छात्र उद्यमिता क्लब E-Cell की सदस्यता भी आवश्यक है।

कौन आवेदन कर सकता है

केंद्र की नीति कहती है कि वह MITAoE के छात्रों और बाहरी सदस्यों को इन्क्यूबेशन देता है। प्री-इन्क्यूबेशन छात्रों के लिए लिखा गया है। आवेदक केंद्र के फ़ॉर्म पर CEO या Incubation Manager को आवेदन करते हैं, जो संबंधित School Dean के माध्यम से जाता है।

जो छात्र कंपनी बनाना चाहता है, उससे अपेक्षा है कि वह पहले संस्थान में प्री-इन्क्यूबेट और इन्क्यूबेट हो। नीति केवल उचित कारण होने पर अपवाद की अनुमति देती है, जिसका निर्णय गवर्नेंस कमेटी करती है।

सुविधाएँ

इन्क्यूबेटी को मेंटरों की उपस्थिति वाला समर्पित को-वर्किंग स्थान मिलता है। केंद्र के पृष्ठ पर हाई-स्पीड इंटरनेट, प्रस्तुतीकरण कौशल में सहायता, बिज़नेस प्रशिक्षण, सलाहकार बोर्ड और मेंटर, नियामक अनुपालन में सहायता, लेखा और वित्तीय प्रबंधन में सहायता, तकनीक के व्यावसायीकरण में सहायता, बौद्धिक संपदा अधिकारों में सहायता, तथा एंजेल निवेशकों, वेंचर कैपिटल, बैंक ऋण और ऋण गारंटी कार्यक्रमों से परिचय भी सूचीबद्ध हैं।

इक्विटी

नीति कहती है कि केंद्र किसी इन्क्यूबेटेड कंपनी के साथ अधिकतम 2% की निश्चित इक्विटी के बदले बातचीत कर सकता है, और इसके बजाय या इसके साथ राजस्व का हिस्सा भी ले सकता है। शर्तें हर मामले में अलग से तय होती हैं।

मान्यता

केंद्र खुद को एक मान्यता प्राप्त बिज़नेस इन्क्यूबेटर बताता है। यह कहता है कि संस्थान को 2020 में MSME बिज़नेस इन्क्यूबेटर योजना के लिए Host Institute के रूप में अनुमोदन मिला था। अनुमोदन की अवधि नहीं बताई गई है।

आकार

केंद्र के पृष्ठों के अनुसार, लिखे जाने के समय 19 छात्र स्टार्टअप अपने विचारों और पहचानी गई समस्याओं पर काम कर रहे थे। वह पृष्ठ तिथि-अंकित नहीं है। पोर्टफ़ोलियो पृष्ठ खाद्य, इंजीनियरिंग, शिक्षा और सेवाओं के कई नामित उपक्रम सूचीबद्ध करता है, पर उनके राजस्व, फंडिंग या एग्ज़िट के आंकड़े नहीं देता।

स्थान

केंद्र संस्थान परिसर में Alandi Road, पुणे 412 105, महाराष्ट्र पर स्थित है।

Get in touch

Send a message to MIT Academy of Engineering — we'll forward it on your behalf.

MIT Academy of Engineering, Alandi Road, Pune - 412 105, Maharashtra (India), 412105

0/2000

Your message will be forwarded to MIT Academy of Engineering

Who they work with

Tags

Frequently asked questions about MIT Academy of Engineering

What is MIT Academy of Engineering?

MIT Academy of Engineering is an incubator based in Pune, Maharashtra.

What does MIT Academy of Engineering do?

MIT Academy of Engineering (MITAoE) पुणे के Alandi Road पर स्थित एक स्वायत्त इंजीनियरिंग संस्थान है, जो Savitribai Phule Pune University से संबद्ध है। इसका स्टार्टअप सहयोग MITAoE Entrepreneurial Development Foundation (MITAoE EDF) के माध्यम से चलता है, जो संस्थान द्वारा स्थापित एक गैर-लाभकारी Section 8 कंपनी है और 7 फ़…

Where is MIT Academy of Engineering located?

MIT Academy of Engineering is located at MIT Academy of Engineering, Alandi Road, Pune - 412 105, Maharashtra (India).

What programs does MIT Academy of Engineering run?

MIT Academy of Engineering runs MITAoE EDF Pre-incubation Platform, MITAoE EDF Incubation Platform, MITAoE EDF Acceleration Platform and E-Summit Bizz Model competition.

What facilities does MIT Academy of Engineering offer?

MIT Academy of Engineering offers Dedicated Co-working Space.

Is MIT Academy of Engineering government recognised?

MIT Academy of Engineering holds the following recognitions and affiliations: MSME Host Institute.

How do I apply to MIT Academy of Engineering?

- जिन छात्रों के पास शुरुआती विचार या परियोजना है, वे प्री-इन्क्यूबेशन से शुरू करें। - इन्क्यूबेशन और एक्सेलेरेशन केवल पिछला चरण पूरा होने के बाद खुलते हैं। - जो संस्थापक MITAoE के छात्र नहीं हैं, वे इन्क्यूबेशन के बारे में पूछ सकते हैं, क्योंकि नीति में बाहरी सदस्यों का उल्लेख है। - प्री-इन्क्यूबेशन के लिए पहले E-Cell की सदस्यता चाहिए। - भरा हुआ आवेदन फ़ॉर्म MITAoE EDF के CEO या Incubation Manage…